Electronics

TypeHardware

Quileg STM32 (Gen 1 & 2)

Open source

An automation device that works as a standard keyboard and mouse; the first two generations' firmware, web helper and serial protocol are archived under the MIT licence.

It works as a standard keyboard and mouse, faithfully performing the repetitive steps you have arranged — with no client to install and no API needed from the target software. If you can do it by hand on screen, it can do it for you. It only presses keys and clicks the mouse on your behalf: no injection, no cracking, and only on computers and accounts you are authorised to operate.

The sequence is an editable, exportable text file: one instruction per line, with comments, importable, exportable and versionable. The web helper opens in Chrome or Edge, connects to the device over Web Serial, and runs the flow with one click once you have arranged it — no backend, no account, and the flow is never uploaded.

The hardware is an STM32F103C8T6 board: the serial link runs at 9600 8N1 and carries 12-byte frames (header + 10 bytes + tail), and the firmware turns each instruction into keyboard or mouse HID reports, so the system sees real input. There are four commands — keyboard, mouse, buzzer and a no-op — identical on both generations, so one flow file and one web helper work with either.

Gen 1 has a 0.96-inch OLED and seven panel buttons, and was made in yellow, white and blue enclosures. Gen 2 drops the screen and adds a buzzer; its enclosure has a built-in USB hub, so several boards can sit side by side or stacked, leaving the computer through one cable and controlled from separate helper pages. Neither generation was sold in volume.

In 2026 the first two generations' firmware, web helper, protocol documents and development notes were archived as-is under the MIT licence. The archive is frozen: no patches and no technical support, but the documentation in the repository is enough to rebuild the device.

Details

  • Works as a standard USB HID keyboard and mouse — no driver, and no API needed from the target software
  • The sequence is a file: one instruction per line, importable, exportable and versionable
  • The web helper is the console (Chrome / Edge with Web Serial); no backend, no account
  • 12-byte serial frames with four commands: keyboard, mouse, buzzer and a no-op
  • Gen 1 has an OLED and seven buttons; Gen 2 adds a buzzer and a built-in USB hub for several boards
  • MIT licence: firmware, web helper and protocol documents archived together

How to get it

Neither generation was sold in volume; this page is an introduction only. The firmware, the web helper and the protocol documents are archived under the MIT licence.

Devices and interface

Photos of the devices and the web helper. Scroll sideways, and click any image to enlarge it.

Scroll sideways for more; click any photo to enlarge it.